Epiroc HC 1050, Инструкция по безопасности и эксплуатации

Страница: 20 / 56

Safety and operating instructions
20 © Construction Tools PC AB | 3390 5211 01 | 2020-09-18
Original Instructions
Type Spanner size Tightening torque
HC 350 17 mm (0.67 in.) 410 Nm (302 ft lbs)
HC 450 17 mm (0.67 in.) 410 Nm (302 ft lbs)
HC 850 17 mm (0.67 in.) 410 Nm (302 ft lbs)
HC 1050 22 mm (0.87 in.) 1500 Nm (1106 ft lbs)
with a rotating mechanism:
Note: The plate (F) is an optional part.
HC 350, HC 450 30 kg (66 lbs)
HC 850 80 kg (176 lbs)
HC 1050 110 kg (243 lbs)
If you don't want to install it you can alternatively prepare
your adapter plate with the required borings. A drawing
of the hole pattern is supplied with the rotation unit.
n
Install the plate (F) on the rotating mechanism (E) as
shown.
B
A
D
E C
F
G
H
n
Fit a pair of lock washers (G) onto every screw (H).
n
Tighten the Allen screws (H) with an Allen key.
n
Tighten the Allen screws (H) with the required tight-
ening torque.
Type Spanner size Tightening torque
HC 350 14 mm (0.55 in.) 219 Nm (162 ft lbs)
HC 450 14 mm (0.55 in.) 219 Nm (162 ft lbs)
HC 850 14 mm (0.55 in.) 219 Nm (162 ft lbs)
HC 1050 17 mm (0.67 in.) 410 Nm (302 ft lbs)
n
Place the adapter plate (D) onto the plate (F) as
shown.
n
Fit a pair of lock washers (B) onto every screw (A).
n
Tighten the Allen screws (A) with an Allen key.
n
Tighten the Allen screws (A) with the required tight-
ening torque.
Type Spanner size Tightening torque
HC 350 17 mm (0.67 in.) 410 Nm (302 ft lbs)
HC 450 17 mm (0.67 in.) 410 Nm (302 ft lbs)
HC 850 17 mm (0.67 in.) 410 Nm (302 ft lbs)
HC 1050 22 mm (0.87 in.) 1500 Nm (1106 ft lbs)
5.5 Attaching the hydraulic
attachment to the carrier
5.5.1 Mechanical mounting aspects
You need an assistant to attach the hydraulic attachment
to the carrier.
n
Agree on hand signals with your assistant, to enable
him to help you place the carrier in the proper posi-
tion to attach the hydraulic attachment.
n
Lower the stick of the carrier into the holder provided
on the adapter plate.
WARNING Injury by impacts
A sudden movement of the carrier may cause your as-
sistant to be hit and injured by the boom or the hydraulic
attachment.
u
Only move the boom very slowly and in a controlled
manner while an assistant is within the danger zone.
u
Always keep sight of your assistant.