manualshive.com logo in svg

Epiroc HC 1050, Инструкция по безопасности и эксплуатации

Поделиться
Скачать
Epiroc HC 1050 Скачать руководство пользователя страница 19

Safety and operating instructions

© Construction Tools PC AB | 3390 5211 01 | 2020-09-18

Original Instructions

19

P T

P

L

L

T

P

T

R2

R1

L

5.3 Manufacturing the adapter

plate

Construction Tools GmbH also supplies base plates to

manufacture adapter plates alternatively to the adapter

plates supplied.

NOTICE

 Adapter plate cracking

The adapter plate may crack if it is not designed for the

high load.

u

Take not only the weight of the hydraulic attachment

but also the crowd force of the carrier, possible vibra-

tion etc. into account when dimensioning the adapter

plate.

u

Ensure that the design conforms to the state of the

art.

u

Have the web plates welded to the adapter plate

base plate by a qualified welding specialist.

The base plate is made of the material EN10025-S355

J2G3.

n

Have the web plates designed and manufactured or

procure web plates to fit your carrier.

n

Ensure that the web plates are welded to the base

plate side marked "TOP".

The adapter plate must not strike in any position during

operation of the hydraulic attachment.

Construction Tools GmbH does not design, manufacture

or sell web plates for adapter plates.

5.4 Installing the adapter plate

NOTICE

 The adapter plate can come loose

The adapter plate can come loose if the fastening

screws are not designed for local high loads.

u

Only use the Allen screws of strength category 8.8

and the pairs of lock washers included in the delivery

to attach the adapter plate or the base plate.

 

WARNING

 

Hands and fingers being cut off or hurt

Bores and surfaces can act like a pair of scissors and

cut off or hurt parts of your body.

u

Never use your fingers to check bores or fitting sur-

faces.

n

Place the hydraulic compactor within the range of the

carrier.

n

Apply anti-seize compound to the Allen screw

threads (A) before inserting them.

The contact faces of the screw head and the lock wash-

ers (B) must not be lubricated.

without a rotating mechanism:

n

Install the adapter plate (D) to the compactor (C) as

shown.

A

B

C

D

n

Fit a pair of lock washers (B) onto every screw (A).

n

Tighten the Allen screws (A) with an Allen key.

n

Tighten the Allen screws (A) with the required tight-

ening torque.

Type

Spanner size

Tightening torque

HC 150

14 mm (0.55 in.)

219 Nm (162 ft lbs)

Содержание HC 1050

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды