![background image](http://html.mh-extra.com/html/epiphan/sdi2usb-3-0/sdi2usb-3-0_user-manual_2417795069.webp)
SDI2USB 3.0 User Guide
Windows only features
Windows only features
Some features are available only in the Windows version of the Epiphan Capture Tool. This section describes
those features.
Status bar (Windows only)
The Windows version of the Epiphan Capture Tool has a status bar that displays information about your
SDI2USB 3.0 or the currently selected video grabber. See below for a review of different things added to the
status bar depending on configuration settings and your current actions with the utility.
No grabbers
If the software doesn't detect any attached video grabbers, the status bar indicates there are no capture
devices found:
No signal on selected grabber
If there is no signal to the currently selected video grabber, the status bar indicates this with a no signal
message:
Ready but not recording
Otherwise, the status bar shows a wealth of information. When not actively recording, the status bar indicates
that it is Ready to start recording, and shows the VGA Mode of the source signal at the right side of the bar.
Recording a video
In the default configuration, when actively recording a video, it looks like this (RECORDING tag, file location,
duration and frame count are added to the status):
Video recording complete
When video recording is complete, the status bar updates to show the final file location and duration. This
stays int he status bar until the application is closed or recording is restarted.
63