![background image](http://html.mh-extra.com/html/epiphan/pearl/pearl_user-manual_2417779072.webp)
Pearl User Guide
Configure a static IP address
4. Select the radio button
use static address
, if not already selected.
5. Enter the desired
IP Address
and
Network Mask
.
Only IPv4 addresses are supported.
6. Enter the
Default Gateway
address. If you do not have a default gateway for your network, enter the
same static IP address as in the previous step.
The default gateway cannot be left blank. If no default gateway is specified, unexpected
behavior occurs.
7. Enter the
DNS Server
address. If you do not have a DNS server, enter the new static IP address of the
system.
8. Change the
MTU Size
value only if needed. See the table below for information on maximum
transmission unit (MTU) values.
9. Click
Apply
to save the changes; the changes are saved and a message appears asking you to reboot.
10. Select the
Maintenance
link under the Configuration menu; the maintenance page appears.
11. Click the
Reboot Now
button near the bottom of the page.
59