Pearl User Guide
Configure a static IP address
5. Touch
Static IP Address
to configure a static IP address; the static IP configuration page appears.
6. Touch an
IP Address
section (e.g. 192) and type a new value using the keypad.
7. Repeat for all fields in the
IP Address
and
Network Mask
.
Only IPv4 addresses are supported.
8. Enter the
Default Gateway
address. If you do not have a default gateway for your network, enter the
same static IP address as in the previous step.
The default gateway cannot be left blank. If no default gateway is specified, unexpected
behavior occurs.
9. Enter the
DNS Server
address. If you do not have a DNS server, enter the new static IP address of the
system.
10. Touch
Apply
to apply the changes.
To configure a static IP address via the web interface:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
3. Select the
Network
link in the Configuration menu; the network configuration page opens.
58