![background image](http://html.mh-extra.com/html/epiphan/lecture-recorder-x2/lecture-recorder-x2_user-manual_2417806025.webp)
VGADVI Broadcaster User Guide
1-1 Connect to the Admin Interface
Connect via the Epiphan Discovery Utility
Epiphan provides a utility for discovering Epiphan devices on your network. The Epiphan network discovery
utility is a 32-bit Windows executable that works on most 32-bit and 64-bit Windows operating systems.
Download and install the utility via the download link on this web page:
http://www.epiphan.com/products/broadcasting/resources
.
To access the VGADVI Broadcaster web interface via the Epiphan discovery utility:
1. Launch the discovery utility.
2. Click
Search
to find all the Epiphan devices on the network; a list similar to the following appears.
3. If more than one device appears, select the one you wish to configure by matching the serial number
listed with the serial number marked on the back of the device.
4. Optionally, note the
IP Address
shown in the stream properties. Use this for quicker access to the device
on future configuration sessions.
5. Click the
Web config
button; your browser will open and point to the web interface page.
http://<IP Address of the VGADVI Broadcaster>/admin
6. Enter the user name and password then click
OK
. The administrative user is ‘admin’. Initially no
password is set. To set a password follow the procedure outlined in
User Administration
.
16