VGADVI Broadcaster User Guide
2-3 Configure an audio source
3. From the web interface, scroll to the channel section and click the channel to which you want to
configure audio settings; the menu expands.
4. Click
Stream Setup
; the Stream setup configuration page opens.
5. Scroll to Audio settings.
6. Check
Enable audio
check box.
7. If the default audio format (PCM 22KHz) is not desired, click the
Audio format
drop-down menu to elect
an audio codec. See
Fine-tune channel configuration
for help choosing one of the supported audio
codecs.
8. Click on the
Audio channels
drop-down menu to choose mono (1 channel) or stereo (2 channels).
9. Click on the
Audio bitrate
drop-down menu to choose the audio transmission speed. Increasing this
value produces better sound quality but uses more system processing power and bandwidth.
10. Click
Apply
.
Set audio volume
To set audio volume (not this is done on the encoder, and not the VGA Grid):
1. Ensure an audio input source is connected to an audio input port.
2. Connect to the admin interface using your preferred connection method. See
Connect to the Admin
Interface
.
3. Login as admin.
46