VGADVI Broadcaster User Guide
5-1 Create Recordings
To toggle recording on/off with the right on-device button (assuming the button has its default
configuration):
1. Power on the device.
2. Attach sources and configure the device.
3. Press the recording button once to start recording; recording starts. If desired, check the web interface
to see that recording is started.
4. Press the recording button again to stop recording. If desired, check the web interface to see that
recording is stopped. See
View the List of Stored Files
The VGADVI Broadcaster gives you the opportunity to change this button behaviour. You can disable the
button or make use of both buttons if you wish.
To disable the button and prevent accidental control of the recording:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin.
3. Select
Button Actions
in the Configuration section; the button action configuration page is displayed.
4. Pick
No Action
from the drop-down lists for
Down
,
Up
, and
Long Press
for
Right Button
.
5. Pick
No Action
from the drop-down lists for
Down
,
Up
, and
Long Press
for
Left Button
.
6. Click Apply.
When configuring one button to start recording and the other button to stop recording, set the Down actions
for the appropriate buttons. Down action is chosen so the recording starts or stops as soon as the button is
pressed, avoiding any delay that may happen before the button is released.
To configure a start recording and stop recording button:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
112
