17
EN
control unit locked (hotel mode)
pre-set timer active
Holiday home mode
Holiday park mode (if flashing)
Descaling pending (symbol flashes)
Descaling in progress (symbol flashes)
12:34
30°C
30°C
is shown if the control unit is in stand-by model
The display will automatically switch this in-
terface from any state if no button has been
pressed within >15 sec.
Interface in stand by
Interface during active heating
is shown if the control unit is in active operation
mode (heating is switched on).
The display will automatically switch this in-
terface from any state if no button has been
pressed within >15 sec (during active heating).
Heating process indication:
During the heating-up phase the bars behind
the temperature figures will fill progressively.
Once the pre-set temperature has been
reached, the bars will remain filled.
Interface in energy-saving mode
current time
the clock symbol
the light symbol
(appears if the light is on)
12 : 00
In addition, the following symbols are displayed
depending on the selected operating mode.
If the control unit is not used for a longer time it
will switch into the energy-saving mode.
A clock randomly moving across the display
every minute will be shown after 5 minutes,
similar to a PC screensaver. The backlighting of
the display is switched off after an additional 15
minutes
By pressing any key you can wake the unit to
the default “Stand-by” interface.
The following symbols are displayed
at the top of the control unit:
12:00
Temperature 30°C
Fragrance 30
Auto-Stop 5:59
Start time
- - : - -
12:00
Temperature
30°C
Fragrance
10
Auto-Stop
6:00
Start time
- - : - -
