18
EN
12:00
Temperature
30°C
Fragrance
30
Auto-Stop
6:00
Start time
- - : - -
12:00
Temperature
30°C
Fragrance
30
Auto-Stop
6:00
Start time
- - : - -
12:00
Temperature
30°C
Fragrance
30
Auto-Stop
6:00
Start time
- - : - -
12:00
Temperature
30°C
Fragrance
30
Auto-Stop
6:00
Start time
- - : - -
value to be adjusted
paramter to be adjusted
highlighted paramter
Temperature
In order to adjust the individual values to the
particular preference, briefly press the
MODE
-button out of Stand-by.
The first parameter will then be highlighted in
inverted colour. and You can then select the de-
sired parameter with the
or
- buttons.
By pressing the
MODE
button again you will
launch the programming mode.
The value of the parameter will flash and will be
shown inverted.
Use the
or
buttons to change the value
of the selected parameter.
To save the changed value press
MODE
for over
3 seconds. Once saved the value stops flashing.
The new value will be applied immediately un-
til another change is made.
If no button is pressed for >15 seconds the unit
switches back to the default display. Changes
made up to then will not be saved
Cabin light
The cabin lighting is automatically switched
on as soon as the heating is switched on. In
the top left of the display the
- symbol is
shown. When the heating is switched off the
cabin lighting will switch off with a delay of 30
minutes.
Irrespective of the status of the control unit, the
cabin lighting can be switched on or off any-
time with the light button
.
Values that flash on the display can be changed
with the
or
- buttons and are shown in
these instructions as displayed.
12:00
Temperature
30°C
Fragrance
30
Auto-Stop
5:59
Start time
- - : - -
12:00
Temperature
30°C
Fragrance
30
Auto-Stop
5:59
Start time
- - : - -
