4
GB
Scope of delivery
(changes without prior notice reserved)
The package contents includes:
1.
Control unit
2. Temperature sensor, consisiting of: sensor board with overheating protection fuse, KTY-
sensor, sensor housing, two 3x25 mm fastening screws and 2,0 m sensor cable
.
3.
P
lastic bag with three 4x20 mm fastening screws.
4.
1
replacement overheating protection fuse
5. Installation and operating manual
Technical specifications
Rated voltage:
400 V 3 N 50 Hz AC
Power output (dry Finnish sauna):
max 9 kW resistive load (AC 1 operation)
Power output (humid operation):
6 kW for sauna 3 kW for vaporizer unit
Power extension:
up to 36 kW (heater) possibile with an optional LSG de-
vice.
Heating time limit:
6 h, 12 h, without limitation (via jumper setting)
Display:
LCD display 65 x 37 mm, alphanumeric, backlighting
Dimensions (H x W x D):
220 x 250 x 67 mm
Protection type:
IPx4 in accordance with EN 60529, splashproof
Temperature control range (
dry mode
):
30 to 115° C
Temperature control range (
humid mode
): 30 to 70° C
Humidity control (without sensor):
proportional to time (10-step control)
Humidity control (with optional sensor): Humidity control basing on relative humidty via humid-
ty sensor F2 (#90.9479 or #945027 as per EN 60335-2-53
norm). Make sure to observe the page 15.
Temperature sensor system:
KTY sensor with safety temperature limiter 142°C. Sup-
port for the optional 2nd temperature sensor.
Water level monitor (for vaporizer):
Dry-run protection with automatic shut-down of the va-
porizer 2 minutes after the low-level alarm.
Type of temperarure regulation:
Digital two-point control
Output for fan:
max. 100 W
Output for light:
max. 100 W
Sauna dry program:
30 min at 90°C after the end of the humid mode.
Environmental temperature:
-10°C bis +40°C
Storage temperatures:
-20°C bis +70°C
