19
GB
value to adjust
12:15
30°C
5 : 59
- - : - -
Temperature
Humidity
Auto-stop
Start time
12:15
30°C
5 : 59
- - : - -
Temperature
Humidity
Auto-stop
Start time
parameter to adjust
12:15
30°C
5 : 59
- - : - -
Temperature
Humidity
Auto-stop
Start time
12:15
30°C
5 : 59
- - : - -
Temperature
Humidity
Auto-stop
Start time
Temperature
In order to adjust the individual values to the
particular desires, briefly push the
MODE
-but-
ton out of Stand-by.
The modifiable parameter will then be high-
lighted in black and it is possible to select with
the
or
- buttons the desired parameter.
By pushing the
MODE
-button again you will
arrive at the programming level.
The name of the parameter is now blinking and
the modifiable value is highlighted in black.
The value highlighted in black can now be
changed with the
or
the - buttons.
All settings out of Stand-by are confirmed by
pressing
MODE
>3 s and are saved in the mem-
ory of the unit.
The blinking of the parameter ends and the
new value is now authoritative until another
change is made.
If no button is pressed for >15 seconds the unit
switches back to the default display. Changes
made up to then will not be saved
Sauna cabin lighting
The cabin lighting is automatically switched on
as soon as the sauna unit is switched on. In the
top left of the display the
- symbol is shown.
When the sauna unit is switched off the cabin
lighting will switch off with a delay of 30 min-
utes.
Irrespective of the status of the sauna unit, the
cabin lighting can be
switched on or off any-
time with the button.
Parameters that blink on the display can be
changed and are shown in these instructions
as displayed.
