EOS 94 6505 00, Инструкции по установке для ритейлеров

Страница: 32 / 72

32 Installation Instructions - EmoTouch 3
Mounting
EN
2
Loosen the clip screws in the housing and slide the clips inward.
3
After routing, pull the control lines through the opening in the housing.

Do not pull the control line too taut so that you can easily remove the
control panel at a later time.
4
Place the bottom piece in the prepared wall cut-out.

Observe the sticker on the housing (oben/up).

When fixing the unit to the wall, ensure that the bottom of the unit is
aligned properly. The side with the hole for the connecting cables
and the slots for the removal tool must be facing downwards.
5
Slide the clips as far out as they will go and tighten the screws clockwise.

The housing must sit firmly in the wall cut-out.
4x
4x
4x
4x
4x