EOS 94 6505 00, Инструкции по установке для ритейлеров

Страница: 27 / 72

EmoTouch 3 - Installation Instructions 27
Mounting
2
Insert the anchors as needed and screw in the top screw.

Allow the screw to protrude approx. 3 mm so you can hook in the
relay box.
3
Open the relay box conduits for the lines.

Either from below or from the rear.
4
Insert supplied rubber grommets into the openings of the lower part of
the housing.
5
Route the connecting cables through the openings.
A Lines with mains voltage, e.g.
mains supply line, heat B Lines with low voltage, e.g. sensor
line, S-Bus (sauna bus)
210
180
3
A B