34
Secondary Installation
Figure 52:
Glass tray burner with glass installed.
Glass
i
nstaLLing
the
g
Lass
b
uRneR
m
eDia
:
Pour the supplied glass media into the tray and evenly distribute over the entire tray area as shown in
Figure 52. There is 3.5lbs of glass included which is just enough for a 0.250” - 0.375” thin layer to cover
the area shown. Ensure that the pilot flame slot remains clear of any glass.
Figure 53:
Glass tray burner with glass for Rock Burner.
If the Rock burner option is being installed use the supplied glass media and fill the up the burner area only
as shown in Figure 53. Only fill until the glass is flush with the bunrner tray, much less glass is used with this
set-up. See instruction sheet with rocks for further set-up info. ONLY USE SUPPLIED GLASS MEDIA.
