Operating Instructions
Remote Flame Control
The Proflame 2 GTMF has six (6) flame levels. With the system on, and the flame level at the maximum in the
appliance, pressing the Down Arrow Key once will reduce the flame height by one step until the flame is turned off.
The Up Arrow Key will increase the flame height each time it is pressed. If the Up Arrow Key is pressed while the
system is on but the flame is off, the flame will come on in the high position (refer to Figure 11 below). A single “beep”
will confirm reception of the command.
Figure 11: Remote Control’s Flame Levels.
Fan Control
The E33 comes with a convection fan that can be
controlled with the Transmitter. The fan speed can be
adjusted thorugh six (6) speeds. To control the fan
press the MODE key (Figure 5) to index to the fan
control icon (Figure 12). Use the UP/DOWN arrow
keys to turn on, off, or adjust the fan speed (Figure
12). A single beep from the IFC will confirm the
command has been received
Figure 12: Fan Control
Figure 13: Light Control
Light Control
This function is not used on the E33 and can be
disregarded.
13
