Entes RG3-15C, Руководство пользователя

Страница: 24 / 37

POWER FACTOR CONTROLLER
RG3-15C/CS/CL/CLS
23
The first parameter in the password menu is the parameter
activation menu(Pin ACt). According to this setting, password for
the device menu can be set “inactive” or “active”. Press the
“SET”
button to enter this menu.
If you did not activate the password before, enter the pin code
as
“1234”
. If you changed the password before, enter that
password. Press
“SET”
button to change the password activation
setting.
In this menu, Parity value can be set as
“no”, “odd”
or
“EVEn”
.
3.10.c Parity Setting
Using the
“UP/DOWN”
buttons, find the parity menu(PAr) menu
which is the third parameter in the RS-485 menu.
Press the
“SET”
button to enter the parity menu(PAr).
In this menu, user password is activated. When the password is
activated, a pin code is always required before entering to the menu.
User password can be changed and activated in this menu. When the
password is activated, a pin code is always required before entering the
menu. Thus, user password prevents any change to the settings of the
device by unauthorized people. For this reason, a pin code with 4 digits
must be set and then it must be activated.
Note: Factory default value for pin code is “1234” and it is not activated.
3.11 Password Activation and Change Settings
3.11.a Pin Activation
Press the “SET” button for 3 s in order to enter the menu.
Using the
“UP/DOWN”
buttons, find “Pin” menu.
Press
“SET”
button to enter the password menu.
Using the
“UP/DOWN”
buttons, select a parity option and press
the
“SET”
button. If you are going to change another setting,
return to the menu by pressing the
“SET”
button. If you do not
want to set another parameter, press the
“ESC”
button.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.