Entes RG3-15C, Руководство пользователя

Страница: 23 / 37

POWER FACTOR CONTROLLER
RG3-15C/CS/CL/CLS
22
In this menu, baud rate value can be set as 1.200 Kbps, 2.400
Kbps, 4.800 Kbps, 9.600 Kbps, 19.200 Kbps or 38.400 Kbps as
defined in the communication software.
3.10.b Baud Rate Setting
Using the
“UP/DOWN”
buttons, enter baud rate value (1.200
- 2.400 - 4.800 - 9.600 - 19.200 - 38.400) and press the
“SET”
button. If you are going to change another setting, return to
the menu by pressing the
“SET”
button. If you do not want to
set another parameter, press the
“ESC”
button.
Using the
“UP/DOWN”
buttons, find baud rate menu(bAUd)
which is the second parameter in the RS-485 menu.
Press the
“SET”
button to enter the baud rate menu(bAUd).
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.
The first parameter in the RS-485 menu is the address setting(Adr).
Press the
“SET”
button for address setting.
Press the
“SET”
button to set the address value.
Enter the communication address between 1-247 and press the
“SET”
button. If you are going to change another setting, return
to the menu by pressing the
“SET”
button. If you do not want to
set another parameter, press the
“ESC”
button.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.