Entes RG3-15C, Руководство пользователя

Страница: 17 / 37

POWER FACTOR CONTROLLER
RG3-15C/CS/CL/CLS
16
If “on” is selected:
When overvoltage error occurs, capacitor steps
stay switched on.
If “off” is selected:
When overvoltage error occurs, capacitor steps
stay switched off.
3.8.a.c Switch On or Switch Off Setting of Capacitor
Steps for Overvoltage Alarm Setting
In order to protect the capacitors from overvoltage, when an overvoltage
alarm occurs, capacitor steps’ switch on or switch off settings are done
in this menu.
If reactive/active energy ratio exceeds the preset value, an alarm occurs.
This ratio can be set for inductive/active and capacitive/active separately
between 0-99.9 %. If this value is set as “0”, this function is disabled.
3.8.b
Reactive / Active Ratio Setting
In order to provide accurate compensation, the upper limit value of
capacitive/active ratio is entered in this menu. This value can be set between
0-99.9 %. If the capacitive/active ratio of the network exceeds the preset
value, an alarm occurs. If this value is set as “0”, this function is disabled.
3.8.b.a
Capacitive Ratio Setting
The second setting in the voltage menu(UoLt) is the overvoltage
delay time(dELy). Press the
“SET”
button to enter the overvoltage
delay time setting menu.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.
Enter the over voltage delay time between 0-999.9 seconds. If
you are going to change another setting, return to the menu by
pressing the
“SET”
button. If you do not want to set another
parameter, press the
“ESC”
button.
The third setting in the voltage menu(UoLt) is the overvoltage
step setting(StEP). Press the
“SET”
button to enter the overvoltage
step setting menu.
Make a selection by using
UP
/
DOWN
buttons.
Using the
“UP/DOWN”
buttons, select
“on”
or
“of”
option and
press the
“SET”
button. Using the
“UP/DOWN”
buttons, enter
to another menu option which you wish to change. If you are not
going to change any more settings, press the
“ESC”
button.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.
Press the
“DOWN”
button in order to switch from overvoltage
menu to the overvoltage step menu(StEP).
Press the
“SET”
button for 3 sec. in order to enter the menu.
Using the
“UP/DOWN”
buttons, find Alarm (Alr) menu. When
“Alarm”
menu is selected, Alarm LED turns on.