Entes RG3-15C, Руководство пользователя

Страница: 25 / 37

POWER FACTOR CONTROLLER
RG3-15C/CS/CL/CLS
24
In this menu, user password is changed. In order to change the password,
old password and new password (x2 times) must be entered.
3.11.b Pin Change
In order to define a new password, the old password must be entered
first. After entering the old password, press the
“SET”
button.
SAUE
on:
Ask password for menu entry (Password
active)
of:
Don’t ask password for menu entry.
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.
Using the
“UP/DOWN”
buttons, select the “Pin ACt” as
“on”
or
“of”
and then press the
“SET”
button. If you are going to change
another setting, return to the menu by pressing the
“SET”
button.
If you do not want to set another parameter, press the
“ESC”
button.
In “Pin ACt” menu, press the
“DOWN”
button to find “Pin CHg”
menu.
Press the
“SET”
button to enter the password change menu(Pýn
CHg) which is the second menu under the password menu(Pýn).
Press the
“SET”
button to change the password.
After entering new password, press the
“SET”
button.
Enter the new password again and press the
“SET”
button. If
you are going to change another setting, return to the menu by
pressing the
“SET”
button. If you do not want to set another
parameter, press the
“ESC”
button.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC”
button until
“SAVE SEt yES”
shows
on the screen. If you want to save the changes, press the
“SET”
button. If not, press the
“ESC”
button.
NOTE: If you do not save your changes, they will not be valid.
NOTE: After the settings in the menu are done, the changed
settings are selected and the menu can be shown by pressing
the “SET” button. If you want to leave the setup menu without
making any other changes, press the “ESC” button until
“SAVE SEt yES” shows on the screen. If you press the “SET”
button,the new settings will be saved and the device will
start to operate with the new settings. If you press the “ESC”
button, the changed settings will be discarded and the device
will continue to operate with the old settings.
NOTE:
While entering the pin code, the blinking digit represents
the digit which will be set. Press the
“UP/DOWN”
buttons to
increase/decrease the value of the related digit. Press
“SET”
button to set the next digit or press
“ESC”
button to set previous
digit.