Enerzone Cambridge EP00075, Инструкция по установке и эксплуатации

Страница: 86 / 92

86
Cambridge Pellet Stove Installation and Operation Manual
APPENDIX C: INSTALLING A THERMOSTAT (AC05558)
Using a thermostat will help you maintain a constant temperature throughout the house. A low
voltage thermostat (24 volts) is required. A fixed wall mount or hand held model can be used.
NOTE
THERMOSTAT MANUFACTURER’S INSTRUCTIONS ALWAYS OVERRIDE THE INFORMATION
PUBLISHED IN THE FOLLOWING SECTION.
Thermostat location
Location of the thermostat is very important to obtain comfort and efficiency from your stove. Locate
the thermostat 4 to 5 feet above the floor in accordance with applicable building codes. Install the
thermostat in a location that provides good airflow characteristics and avoid areas behind doors, near
corners, air vents, direct sunlight or heat generating devices. If the thermostat is installed in the same
room as the stove, it should also be located at least 15 to 20 feet from the stove. To prevent cycling,
you should avoid installing the thermostat on a poorly insulated outside wall or directly in front of the
stove.
A THERMOSTAT
B 15’ MINIMUM