Enerzone Cambridge EP00075, Инструкция по установке и эксплуатации

Страница: 31 / 92

Cambridge Pellet Stove Installation and Operation Manual
31
6.1.5 Adjusting the Combustion Level (Heat Output)
Press on the
pellet burn rate
adjustment button
Press + or -
to adjust
the burn rate
The stove’s input range goes from 10,500 BTU to 45,000 BTU. To change combustion level, select the
flame icon on the main status page to display the “+” and “-” combustion level settings.
NOTE
INPUT RANGE MAY VARY ACCORDING TO THE TYPE OF PELLETS BEING USED.
Even though your stove can burn a large variety of wood pellets, we strongly recommend the use of
high quality pellets to obtain maximum performance out of your stove (see
Section 5.2.1 Proper
Fuel ). When using lower quality combustible, a restrictive venting system or using the stove in high
altitude, you may need to adjust the “PILOT SETTING ADJUSTMENT” and the “FUEL QUALITY
ADJUSTMENT”. These two (2) settings are available from the “SETUP” page. See the following section
for more details.
NOTE
TO OBTAIN OPTIMAL RESULTS MAKE SURE THE VENTING SYSTEM, HEAT EXCHANGER AND EXHAUST
CHANNELS ARE CLEANED BEFORE PERFORMING ANY SETTING CHANGES.