Energie AQUAPURA SPLIT 160i, Техническое руководство

Страница: 58 / 108

58
AQUAPURA SPLIT
English
Technical Manual
6.2. Display Features
1 – ON/OFF equipment
Press “ ” for a few seconds, the green light will come on and the unit will start operating. To switch off,
follow the same procedure, the light switches off simultaneously with the equipment.
2 – Set operating temperature
Press “ ▼ ” key to decrease or “ ▲ ” to increase the temperature set point.
3 – Set clock
Press “ “key to confirm the changes.
Note : Factory set point 50
0
C.
To access clock programming press “ “,when the hour light is flashing
use the “ ▼ ” or “ ▲ ” cursor to change hour;
Press the “ “button again when the minute light is flashing use the “ ▼ ”
or “ ▲ ” cursor to change the minutes.
Press “ “key to confirm the changes.
4 – Scheduled programming
Program timer 1
Press the “ “ button until “Timer1 – On” is selected, , when the hour light is flashing use the “ ▼ ” or “ ▲ ”
cursor to change the hour; press the “ “ button again to change the minutes.
Press the “ “ button to select “Timer1 – OFF”, when the hour light is flashing use the cursor “ ▼ “;press the
“ “ button again to change the minutes.
Press the “ “ button to confirm timer 1 configuration.
Program timer 2
Follow the same steps as “Timer 1” to configure “Timer 2 – ON” and “Timer 2 – OFF”
5 – Cancel scheduled programming
Press and hold the “ “button for 3 seconds to cancel the scheduled programming.