Energie AQUAPURA SPLIT 160i, Техническое руководство

Страница: 39 / 108

39
AQUAPURA SPLIT
English
Technical Manual
1.3 . Safety Information
When installing:
• The installation of heat pump equipment for heating sanitary water must be carried out by staff
with suitable training and qualified for this purpose;
• The device should not be installed in places that present a risk of impact, shock or explosion;
• Keep the equipment packed until you reach the place and time of installation;
• Make sure all hydraulic couplings are watertight before connecting the equipment to the power
supply.
Maintenance of the equipment:
• Equipment maintenance should be carried out by customer service, except operations of general
and continuous cleaning which could/should be carried out by the user;
• Power supply to the equipment must be disconnected during maintenance operations;
• The supplier recommends at least one annual inspection to the equipment, by a qualified techni -
cian;
• Cleaning and maintenance must not be carried out by children unless they are under supervision.
High pressure and temperature:
• The principle for running this equipment is directly linked to high temperature and pressure; thus,
the processes that imply contact with the equipment, must be thought out with caution to prevent
the risk of burns and projection of material.
Refrigerant Fluid:
• The refrigerant fluid used in the entire process is R134a, CFC-free, non-inflammable and without
harmful effects to the ozone layer;
• However, according to the law, the fluid in this equipment cannot be released into the environment;
• Handling of the fluid in the equipment must be carried out by a qualified technician.
Information for the Client:
• The Installer must inform the client about the running of the equipment, its dangers, rights and
duties of the client.
2. PACKAGE
2.1. Contents
The equipment comes in two packages, each one on a wooden pallet with protective units and wrapped
in cardboard.
The packages contain:
I. Outside unit (Heat Pump):
II. Condensation draining nozzle
III. Pipe for draining condensation
IV. Inside unit (storage hot water + hood)
V. PT valve
VI. Installation Manual