120430
74
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
A: No the unit has internal hardware timers for each controlled
socket that allows it to operate disconnected from the computer
once it has been programmed.
Q. I am having trouble connecting to my device via the internet. It just
says
Activated. Trying to connect
in the browser.
A: A problem with your DNS ip address settings could also be
causing this. The DNS settings are set on the web interface page
of the device. Please check the DNS address has a valid value
–
not 0.0.0.0. You can check this against your router. Typically you
can log into your router via you browser using address
192.168.0.1 which is common. You need to know the router login
id and password e.g. admin and ???? Most likely the DNS server
address from your router will have been automatically inserted
with your internet service provider’s DNS server address.
Q. I can operate it ok over my own local network and via the power
manager software. However, when I try connecting over the internet it
doesn’t connect. After I log in, it brings up a message that it is
executing a command and nothing further happens.
A: There might be a conflict/problem with your router
settings. Make sure that the router permits the transmission
