120430
18
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
The default password is
1
. It is recommended to change the
password on the
Device settings
page (see section 4.6 below)
after the first login.
After a successful login you will face the
Socket 1 Status
page
(see section 4.2 below).
Note:
You may then need to open the
LAN settings
page (see section 4.5
below) to complete the IP configuration.
4.2. EnerGenie page
With the help of EnerGenie page (see Figure 6 below) you will be
able to see the status of all your four manageable sockets, and to
switch the sockets on and off manually. The status of your
sockets, as well as the buttons to switch them on/off are located at
the top of the page.
Note:
the names of the sockets can be changed from the default
Socket1/Socket2/Socket3/Socket4 to something meaningful on the page
Socket Name Settings (see section 4.4 below).
The EnerGenie page also allows you to setup access and
management (switch on and off) of your PMS-LAN from anywhere
via Internet even if it does not have an external IP address. To
setup this free service you should follow two simple steps:
