120430
15
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
3.4. IP configuration
The utility
Find PMS-LAN
(see Figure 4 below) will run
automatically during the software installation but it can also be
started from
Start/All Programs/Power Manager
. The IP range
where you would like to search for PMS-LAN will be set
automatically according to the IP settings of your LAN adapter but
can be changed manually in the
Adapter subnet
fields. Now press
the
Search
button.
Note:
only PMS-LAN within a local subnet can be found. If your
computer LAN adapter is not in the (default) subnet of PMS-LAN
(as may be the case if you chose option B section 3.2) you will
have to change its IP address manually to be able to find PMS-
LAN.
For example if you wish to find PMS-LAN (with the default IP
192.168.0.254), the IP address of your computer should be set as
192.168.0.XXX (where XXX stands for any digit, for example 1)
and the subnet mask should be 255.255.255.0.
After the searching the IP addresses of the found PMS-LAN
devices will appear in the list box. Select PMS-LAN which you
want to access, and press the
Open
button (see Figure 4 below).
