120430
31
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
1. Initialise the internal clock by entering the current local date
and time. Alternatively if the option
Use NTP for timer
correction
is enabled (by default) then the time will be taken
from the NTP server. The device will try to connect with the
server every 18 hours. The first synchronization would take
place in 15 seconds after you press the
Apply
button.
NTP
server
field should have a valid name of NTP server (by
default “pool.ntp.org”). If for any reason the NTP time
correction doesn’t work you can choose the best NTP server
for your country via the website
www.pool.ntp.org
.
Note:
for
NTP time correction to work properly the device should have
access to the Internet and have a proper DNS server setting (see
section 4.5 above).
2. Server name can be convenient to identify the web server if
you have more than one PMS-
LAN. It is “Server 1” by default.
3. The password is necessary to access PMS-LAN both from
your web browser and the
Power Manager
software (see
section 6 below). This password is case-sensitive and can be
up to 32 characters long. Alphanumeric characters and
spaces may be entered. Only the first eight characters of the
password are used to access the device with the
Power
