120430
51
All brands and logos are registered trademarks of their respective owners
POWER MANAGEMENT SYSTEM - LAN
The new event time should be in the future
There can not be a duplicate entry
The total quantity of events can not exceed 16 per socket
The total quantity of events also depends on the total
execution period of the schedule
The interval between the present and the last entry can not
exceed 180 days
Without loop the total execution period of the schedule can
not exceed 215 days
Loop period cannot exceed 180 days
NOTE:
If the device is powered off, the hardware schedule is still in the
device memory and will be resumed when the power supply is restored.
However the whole schedule will be then delayed by the duration of the
power cut off. The PMS-LAN will start beeping indicating a hardware
schedule problem. Press the
“Silence” button once to turn the beeper off
if you wish to ignore the delay in the schedule. Pressing
the “Silence”
button again after the beeps have been silenced will cause the schedule
to be adjusted by one minute. Alternatively create and upload a new
schedule using the ‘
Timer schedule
’ dialog box.
