OSD Manual
80
¾
RUN SEQUENCE
Users can command the Dome Camera to run the selected Sequence line
manually. Press the <CAMERA MENU> key (ENTER) to execute a
sequence line.
¾
EXIT
Exit <SEQUENCE>
menu and go back to the <MAIN PAGE 2>
to carry on
other function setups.
NOTE:
Users could execute the Sequence function through a
keyboard. Please refer to the
Quick Guide
of the control keyboard for
further information.
2.14 AUTOPAN
Auto-Pan means motion of scanning an area horizontally so that the Dome
Camera can catch horizontal view. The parameters are listed as follows.
¾
AUTOPAN LINE
There are four sets of Auto-Pan line built in a Dome Camera. Users can
choose a line to execute by pressing LEFT/RIGHT direction keys. In
addition, users are able to command the Dome Camera to do endless
panning by setting the start point the same as the end point.
¾
START POINT
Follow the description below to set the start position of the AUTOPAN
path.
15)
STEP 1: Move the cursor to <START POINT> and press <ENTER> while
the item, <PT MOVE>, is flashing. Then the item will turn <TO
SAVE> automatically.
16)
STEP 2: Move the dome to a desired position and press <ENTER> to
save the position as the start point; the cursor will move to
<END POINT> automatically. Ensure setting the end point to
complete auto-pan setting.
NOTE:
The tilt and zoom values of the start point will be recorded
and fixed for the selected Auto-Pan line.
Содержание HDD-20
