Eneo HDD-20, Руководство по установке

Страница: 81 / 92

OSD Manual
81
¾
END POINT
Users are able to set the end point after the start point is defined. Pan the
Dome Camera to another position and press <ENTER> to save the
position as the end point.
¾
DIRECTION
The item is for setting the Auto-Pan direction of the Dome Camera. The
dome will start to pan clockwise from the start point to the end point if your
selection is <RIGHT>, and then return to the start point. The dome will
start to pan anti-clockwise from the start point to the end point if your
selection is <LEFT>. Refer to the diagram below.
¾
SPEED
The item is for defining the Dome Camera rotation speed while running
auto-pan. The speed is adjustable from 1 to 4 (10 ~ 45 degree/sec.).
¾
RUN AUTOPAN
After all setting related to Auto-Pan are completed, select this item to
execute the Auto-pan function. Press the <CAMERA MENU> key (ENTER)
to run an Auto-Pan path.
¾
EXIT
Exit <AUTOPAN> menu and go back to the <MAIN PAGE 2> to carry on
other function setups.
NOTE:
Users could execute the Auto-Pan function through a
keyboard. Please refer to the control keyboard’s quick guide for further
information.
LEFT
(anti-clockwise)
RIGHT
(clockwise)
Start Point
End Point
Dome Camera
RIGHT LEFT