Eneo HDD-20, Руководство по установке

Страница: 86 / 92

OSD Manual
86
¾
ALARM TYPE
There are two kinds of alarm types: Normal Open and Normal Close,
which are illustrated as below. Select an alarm type that corresponds with
the alarm application.
¾
ALARM ACTION
The alarm actions include Preset, Sequence, Autopan and Cruise
functions. Select one of these modes so that certain action will be
executed when an alarm is triggered. Use the right direction key of the
control keyboard to select a particular action mode, and the items listed
below will change in accordance with your selected alarm action.
Additionally, when an alarm is triggered, there will be a flash warning
notice: ALARM displayed in the upper right corner of the screen.
NOTE:
When alarm condition (Dwell Time Setting: 1~127 seconds/
ALWAYS) is released, the Dome Camera will go back to the
previous status before alarm was triggered.
z
PRESET POINT
Select a preset point where the Dome Camera should go when an
alarm pin is triggered. The preset point(s) should be set prior either in
the <PRESET> setup menu or through the keyboard.
z
SEQUENCE LINE
Select a sequence line that the Dome Camera should execute when
an alarm pin is triggered. The sequence line(s) should be defined prior
either in the <SEQUENCE> setup menu or through the keyboard.
Normal Open
Alarm In
Normal Close
Alarm In