Eneo HDD-20, Руководство по установке

Страница: 84 / 92

OSD Manual
84
z
CRUISE LINE
Select a cruise line that the Dome Camera should execute after the
Return Time function is activated. The cruise line(s) should be defined
prior either in the <CRUISE> setup menu or through the keyboard.
¾
RETURN TIME
The dome starts to count down Return Time when the dome idles, and
then execute the <SELECT MODE> function when the return time is up.
The Return Time ranges from 1 to 128 minutes.
¾
GO
If Home function is enabled, users are allowed to execute <HOME>
function by selecting this item.
¾
EXIT
Exit <HOME SETTING> menu and go back to the <MAIN PAGE 2> to
carry on other function setups.
2.17 IR FUNCTION (Removable IR Cut Filter)
With the IR cut filter, the Dome Camera can still catch clear images at night
time or in low light conditions. During day time, the IR cut filter will be on to
block the infrared light for clear image; during night time, the IR cut filter will be
removed to catch infrared light, and the displayed images will become black
and white. Refer to the description below to operate the IR function.
¾
AUTO
The Internal circuit will automatically decide the occasion to remove the IR
cut filter according to the value of light condition calculated by the internal
light algorithm.
z
THRESHOLD
The Dome Camera will remove the filter immediately when the
threshold value is reached. For the M model, the threshold options are
<LOW>, <MID> and <HI>. <LOW> threshold indicates a higher
sensitivity and can improve reliability of lens so that it is easier to
switch to Day mode and relatively difficult to change into Night mode;
while <HI> indicates that it is easier to switch to Night mode and
difficult to change into Day mode.