OSD Manual
79
¾
SEQUENCE LINE
There are eight sets of sequence lines built in the Dome Camera. Using
LEFT/RIGHT direction keys to select a line first and then set its sequence
points.
¾
SEQUENCE POINT
Up to 64 points can be setup for each Sequence line. The Sequence
Points represent order of the preset points that the Dome Camera will
automatically run. The following setup items, including Preset Position,
Speed and Dwell Time will influence how the camera runs through each
sequence point.
¾
PRESET POSITION
Users can assign a specific preset position to the selected Sequence Point
with this item. Options are from <1> to <255> and <END>. <END> is used
for the Sequence Point following the last Sequence Point when the
amount of sequence points (refer to the previous section) is less than 64
points.
NOTE:
If not using all 64 points, please set the point following the
last Sequence Point as <END> (PRESET POSITION) so that the
sequence line can work properly. For example, if a user intends to
set a Sequence Line with 5 sequence points. It is required to set
the PRESET POSITION of Sequence Point 06 as <END>.
¾
SPEED
Users can set the pan/tilt speed of the Dome Camera from one Sequence
Point to the next one, and the range of setup speed is from 1 to 15. Within
the range, PAN speed varies from 10 to 400 (degree/sec.), and TILT speed
varies from 8 to 400(degree/sec.).
¾
DWELL TIME
The DWELL TIME is the duration time that the Dome Camera will stay at a
Sequence Point, and the range is from <000> to <127> seconds. The
Dome Camera will go to the next sequence point when the DWELL TIME
expires. If the setting is <000>, the Dome Camera will stay at this
Sequence Point for less than 1 second and then shift to the next point.
Содержание HDD-20
