Endress+Hauser Smartec S CLD132, Руководство по эксплуатации

Страница: 27 / 44

Smartec S CLD132/134 PROFIBUS-PA/-DP System integration
Hauser 27
Manufacturer-specific parameters Smartec S
Parameter E+H
Matrix
Slot Index Size
(bytes)
Type Acc. Store
Measured value V0H0 3 100 4 Float r D
Temperature V0H1 3 101 4 Float r D
Operating mode V0H2 3 102 1 Unsigned8
0: Conductivity
1: Concentration r D
Unit of measurement (concentration) V0H3 3 103 1 Unsigned8
57: %
139: ppm
245: mg/l
106: tds
251: without r, w N
Number of decimal places V0H4 3 104 1 Unsigned8
0: X.xxx
1: XX.xx
2: XXX.x
3: XXXX r, w N
Unit of measurement (conductivity) V0H5 3 105 1 Unsigned8
66: mS/cm
67:
μ
m/cm
240: S/m
r, w N
Signal damping V0H6 3 106 1 Unsigned8 r, w N
Raw value V0H7 3 107 4 Float r D
Current measuring range V0H9 3 108 1 Unsigned8 r, w N
Temperature measurement V1H0 3 109 1 Unsigned8
0: fixed
1: Pt 100
2: Pt 1000
3: NTC r, w N
Process temperature V1H3 3 110 4 Float r, w N
Cell constant V1H4 3 111 4 Float r, w N
Installation factor V1H6 3 112 4 Float r, w N
Calibration temperature V1H8 3 113 4 Float r, w N
Temperature correction V1H9 3 114 4 Float r, w N
Contact function V3H0 3 115 1 Unsigned8
0: Alarm function
1: Limit function
2: Limit + alarm fct. r, w N
Switch-on delay V3H3 3 116 2 Unsigned16 r, w N
Switch-off delay V3H4 3 117 2 Unsigned16 r, w N
Number of binary inputs V4H0 3 118 1 Unsigned8 r, w N
Source of binary inputs V4H1 3 119 1 Unsigned8
0: binary contacts
1: cyclic data r, w N
Processed measuring range V4H2 3 120 1 Unsigned8 r, w N
Operating mode of processed
measuring range V4H3 3 121 1 Unsigned8
0: Conductivity
1: Concentration r, w N
Substance selection of processed
measuring range V4H4 3 122 1 Unsigned8
0: NaOH
1: H2SO4
2: H3PO4
3: HNO3
4: User 1... r, w N