Endress+Hauser Smartec S CLD132, Руководство по эксплуатации

Страница: 12 / 44

System integration Smartec S CLD132/134 PROFIBUS-PA/-DP
12 Hauser
5 System integration
5.1 Block model of PROFIBUS PA/DP
In the PROFIBUS configuration, all the device parameters are categorized according to their
functional properties and tasks and are generally assigned to three different blocks. A block
may be regarded as a container in which parameters and the associated functionalities are
contained.
A PROFIBUS device has the following block types (see

å 9):
• A Physical Block (device block)
The Physical Block contains all device-specific features of the unit.
• One or more Transducer Blocks
The Transducer Block contains all the measuring and device-specific parameters of the
device. The measuring principles (e.g. conductivity, temperature) are depicted in the
Transducer Blocks in accordance with the PROFIBUS Profile 3.0 Specification.
• One or more function blocks
A function block contains the automation functions of the device. The transmitter contains
Analog Input blocks by means of which the measured values can be scaled and examined
for limit value overshoot.
A number of automation-related tasks can be implemented with these blocks. In addition to
these blocks, a transmitter can have any number of additional blocks, for example several
Analog Input function blocks if the transmitter can process more than one process variable.
a0005920-en
Fig. 9: Block model of Smartec S (grey = profile blocks)
Sensor
Signal processing
Manufacturer specific
parameters
Analyzer Transducer Block 1
Main Meas. Value
Main Process Value Analog Input Block 1
Main Meas. Value
Main Process Value
Analyzer Transducer Block 2
Temperature Value
Temperature Analog Input Block 2
Temperature Value
Temperature
OUT VALUE
Value/Status
OUT VALUE
Value/Status
PROFIBUS
Master
Class
1
(cyclical
dat
a)
MRS
Local operation
Physical Block
Funktionsgruppe
ALPHA-TABELLE Eingabe der Anzahl der
Tabellenstützpunkte
1 ... 10
1
Auswahl der
Tabellen
1 ... 4
(>1 nur bei MBU)
1
Auswahl der
Tabellenoption
edit
lesen
T 2
Multiplikationsfaktor
für den Konzentrationswert
einer User-Tabelle
(nur bei MBU)
0,5 ... 1,5
1
K2
T 1
Auswahl des
Tabellenwertepaares
1 ... Anzahl aus R3
fertg
1
T 4
Eingabe des
Temperaturwertes
(x-Wert)
–35,0 ... 250,0 °C
0,0 ° C
T 5
T
T 3
Funktionsgruppe
KONZENTRATION
K
Auswahl der aktiven
Konzentrationstabelle
; H SO ;
H PO ; HNO
User
... 4
N aO H
1
2 4
3 4 3
K1
Auswahl der
Tabellen
1 ... 4
(>1 nur bei MBU)
1
K3
Auswahl der
Tabellenoption
edit
lesen
K4
Eingabe der Anzahl der
Tabellenstützpunkte
1 ... 16
1
K5
Funktionsgruppe
SERVICE
S
Auswahl der
Sprache
; GER
ITA; FRA
ESP; NEL
EN G
S 1
HOLD-Konfiguration
Kein = kein HOLD
Setup = bei Parametrieren
CAL = bei Kalibrieren
S+C = bei Parametrieren
und Kalibrieren
S 4
Eingabe des
Festwertes
(nur fall Fest)
0 ... 100 %
von 20 bzw. 16 mA
0
Auswahl des
HOLD-Effektes
Fest = fester Wert
L etzt = letzter Wert
S 3 S 2
Manueller HOLD
ein
aus
S 5