Endress+Hauser RID16 Скачать руководство пользователя страница 47

Страница: 47 / 58

RID16

Operation via FOUNDATION™ Fieldbus

Hauser

Nonvolatile Cycle Time
(NV_CYCLE_T)

Read only

Displays the time interval for which the dynamic device parameters are stored
in the nonvolatile memory.
The time interval displayed relates to storage of the following dynamic device
parameters:
• OUT
• PV
• FIELD_VAL

Note!

Since the device does not store the dynamic device parameters in the
nonvolatile memory, this parameter always displays the value 0.

Order Code /Identification
(ORDER_CODE)

Read only

Displays the order code for the device.

Order Code Part 2
(ORDER_CODE_PART2)

Read only

Display the second part of the order code.

Order ident
(ORDER_IDENT)

Read only

Display the order ident number.

Restart (RESTART)

AUTO - OOS

This parameter is used to reset the device in various ways.

Options:

• Restart UNINITIALIZED
• RUN
• Restart RESOURCE (restart the Resource Block)
• Restart with DEFAULTS (restart with the specified

default values as per FF-Spec. (only FF bus
parameters))

• Restart PROCESSOR
• Restart Order Configuration (all the parameters are

reset to the original order configuration)

• Restart PRODUCT DEFAULTS (resets all the device

parameters to the default values)

• Restart ENP: only for service reasons.

Resource State
(RS_STATE)

Read only

Displays the current operating status of the Resource Block.

Display:

STANDBY

The Resource Block is in the OOS operating mode.
It is not possible to execute the remaining blocks.

ONLINE LINKING

The configured connections between the function
blocks have not yet been made.

ONLINE

Normal operating status, the Resource Block is in the
AUTO operating mode. The configured connections
between the function blocks are established.

Serial Number
(SERIAL_NUMBER)

Read only

Displays the device serial number.

Service Locking
(SERVICE_LOCKING)

AUTO - OOS

Only for service reasons.

Set Fault State
(SET_FSTATE)

AUTO - OOS

This parameter can be used to manually enable the security behavior of the
device.

Resource Block

Parameter
Index

Parameter

Write access with
operating mode
(MODE_BLK)

Description

Содержание RID16



























































Результаты поиска

Содержание RID16

Отзывы:

Похожие инструкции для RID16

Бренды по названию

Популярные бренды

Endress+Hauser RID16, Руководство по эксплуатации

Результаты поиска

Содержание RID16

Отзывы:

Похожие инструкции для RID16

Бренды по названию

Популярные бренды