Operation via FOUNDATION™ Fieldbus
RID16
46
Hauser
15
Hard Types
(HARD_TYPES)
Read only
Displays the input signal type for the Analog Input function block.
43
Hardware Version
(HARDWARE_VERSION)
Read only
Displays the version of the device hardware.
41
ITK Version (ITK_VER)
Read only
Displays the version number of the supported ITK test.
32
Limit Notify
(LIM_NOTIFY)
AUTO - OOS
This parameter is used to specify the number of event reports that can exist
unconfirmed at the same time.
Options:
0 to 3
Factory default:
0
10
Manufacturer ID
(MANUFAC_ID)
Read only
Displays the manufacturer's ID number.
Display:
0 x 452B48 = Hauser
31
Max Notify
(MAX_NOTIFY)
Read only
Displays the maximum number of event reports supported by the device that
can exist unconfirmed at the same time.
Display:
3
22
Memory Size
(MEMORY_SIZE)
Read only
Displays the available configuration memory in kilobytes.
!
Note!
This parameter is not supported.
21
Minimum Cycle Time
(MIN_CYCLE_T)
Read only
Displays the minimum execution time.
5
Block Mode (MODE_BLK)
AUTO - OOS
Displays the current (Actual) and desired (Target) operating mode of the
Resource Block, the permitted modes (Permitted) supported by the Resource
Block and the normal operating mode (Normal).
Display:
AUTO - OOS
The Resource Block supports the following operating modes:
AUTO
(automatic
operation)
In this mode the execution of the remaining blocks
(ISEL, Arithmetic, Integrator and PID function block) is
permitted.
OOS
(out of service)
The block is in the “Out of Service” mode. In this
mode execution of the remaining blocks (ISEL,
Arithmetic, Integrator and PID function block) is
blocked. These blocks cannot be set to AUTO mode.
!
Note!
The current operating status of the Resource Block is also shown via the
RS_STATE parameter.
52
MS Resource Directory
(MS_RESOURCE_
DIRECTORY)
Read only
Displays the resource directory for the ENP.
Resource Block
Parameter
Index
Parameter
Write access with
operating mode
(MODE_BLK)
Description
