Endress+Hauser Liquistation CSF28, Руководство по эксплуатации

Страница: 34 / 72

Commissioning Liquistation CSF28
34 Hauser
The Commissioning Wizard starts as soon as the device is connected to the electricity
supply. At the start, it is executed repeatedly until the user has fully completed all the
steps of the commissioning process in the Wizard.
The following settings can be made in the Wizard:
• Selection of language for initial execution
• Date and time
• Sample temperatures
• Bottle distribution
• Information about the flowmeter
Flowmeter present: if so, settings for the flow input (analog/binary)
• Sampling volume (only for vacuum device)
• Calibration of sampling volume for peristaltic pumps
• Distribution arm calibration
• Switch to Program Wizard
• Create backup copy
‣
In the Guidance menu, start the Commissioning wizard and follow the instructions.
 A wizard now guides you through the settings.
9.3.3 Starting the Program Wizard
Creating the sampling program
A Program Wizard is available for the configuration of one or more sampling programs
(max. 3).
Some settings can be made for all program types:
• Sampling mode
• Sampling volume (for peristaltic pump)
• Sampling interval (for time- and flow-paced sampling)
• Change times for bottle changes
• Bottle synchronization
• Stop conditions
The following settings can also be made depending on the mode:
• Pulse (binary input)
• Current input
‣
In the Guidance menu, start the Program wizard and follow the instructions.
 A wizard now guides you through the settings.
During commissioning, you can call up and run through the Program Wizard directly.
9.3.4 Display behavior
The screen can be adjusted to the working environment with the following settings:
• Contrast
• Backlight
• Automatic
The backlighting is switched off automatically after a short time if a button is not
pressed. It switches back on again as soon as you press the navigator button.
• On
The backlighting does not switch off automatically.
• Screensaver
• Screen rotation
If Automatic is selected, the single ‐ channel measured value display switches from one
channel to the next every second.
‣
Change the screen settings in the System / Display menu.