Endress+Hauser Liquistation CSF28, Руководство по эксплуатации

Страница: 31 / 72

Liquistation CSF28 System integration
Hauser 31
8 System integration
8.1 Integrating the sampler in the system
8.1.1 Web server
Connecting the web server
‣
Connect the communication cable of the computer to the Ethernet port of the SYS base
module in the controller housing.→  21
Establishing the data connection
You need an activation code for the web server.
To ensure that your device has a valid IP address, you must disable the
DHCP parameter in
the Ethernet settings.
‣
Switch off DHCP in the System / Webserver / Ethernet settings menu.
You can assign the IP address manually in the same menu (for point-to-point
connections).
Setting the IP address under Microsoft Windows 10
The IP address and subnet mask of the device can be viewed in the Diagnostics / System
information / Ethernet menu
1. Start the PC.
2. First, configure a manual IP address in the network connection settings of the
operating system.
3. Open Network and Sharing Center.
 Apart from your standard network, you should see an additional Ethernet
connection (e.g. as an "unidentified network").
4. Select the link to this Ethernet connection.
5. In the pop-up window select the "Properties" button.
6. Double-click "Internet Protocol Version 4 (TCP/IPv4)".
7. Select "Use the following IP Address".
8. Enter the desired IP address. This address must be in the same subnet as the IP
address of the device, e.g.:
 IP address for Liquistation: 192.168.1.212 (as configured previously)
IP address for PC: 192.168.1.213.
Operating Liquistation via the web browser
1. Start the Internet browser.
2. If you use a proxy server to connect to the Internet:
Disable the proxy (browser settings under "Connections/LAN settings").
3. Enter the IP address of your device in the address bar (192.168.1.212 in the
example).
 The system takes a few moments to establish the connection and then the CM44
web server starts. You might be asked for a password. The factory setting is
"admin" for the user name and "admin" for the password.
4. Enter the following address(es) to download logbooks:
 192.168.1.212/logbooks_csv.fhtml (for logbooks in CSV format)
The menu structure of the web server corresponds to the onsite operation.