Endress+Hauser Liquistation CSF28, Руководство по эксплуатации

Страница: 20 / 72

Electrical connection Liquistation CSF28
20 Hauser
‣
When connecting to an internal voltage source, use the terminal connection on the rear
of the dosing compartment. The connection is located on the lower terminal strip (on
the far left, + and -), ()
6.2 Connecting the signal transmitter to the alarm relay
The sampler allows you to connect signal transmitters, such as LED lights. A binary output
coupled with a relay is provided on the back of the sampler for this purpose.
12
14
11
A0016348
 15 Connection example for binary output with relay
1. Remove the cover on the rear panel.
2.
1
A0048684
 16 Wiring the binary output
1 Relay (coupled with binary output)
Wire the signal transmitter at the relay at the top.