Endress+Hauser Liquiline System CAT860, Руководство по эксплуатации

Страница: 5 / 44

Liquiline System CAT860 Basic safety instructions
Hauser
5
2 Basic safety instructions
2.1 Requirements for personnel
‣
Installation, commissioning, operation and maintenance of the measuring system must only
be carried out by specially trained technical personnel.
‣
Trained personnel must be authorized for the specified activities by the system operator.
‣
Electrical connection must only be carried out by a certified electrician.
‣
Technical personnel must have read and understood these Operating Instructions and must
adhere to them.
‣
Measuring point faults may only be rectified by authorized and specially trained personnel.
Repairs not described in the enclosed Operating Instructions may only be carried out by the
manufacturer directly or by the Service Organization.
2.2 Designated use
The Liquiline System CAT860 sample preparation system is designed to automatically supply
process measuring systems with filtered samples from secondary clarification and sludge
activation (see Technical Data).
If the device is used for any purpose other than that described, this poses a threat to the safety
of people and the entire measuring system and is therefore not permitted.
The manufacturer is not liable for damage resulting from improper or non-designated use.
2.3 Occupational safety
As the user, you are responsible for complying with the following safety conditions:
• Installation instructions
• Local prevailing standards and regulations.
2.4 Operational safety
‣
Before commissioning the entire measuring point, check all the connections. Make sure that
electric cables and hose connections are not damaged.
‣
Do not operate damaged products and secure them against unintentional commissioning.
Label the damaged product as defective.
‣
If faults can not be rectified, the products must be taken out of service and secured against
unintentional commissioning.
2.5 Product safety
The product has been designed and tested to meet state-of-the-art safety requirements, and left
the factory in a condition in which it is safe to operate.
The relevant regulations and European standards have been complied with.