Endress+Hauser Liquiline System CAT860, Руководство по эксплуатации

Страница: 19 / 44

Liquiline System CAT860 Installation
Hauser
19
5.3.4 Quick release fastener
a0022633
Fig. 10: Mounting the chain retainer
1 Bore - makes it possible to screw the adapter tight
2 Adapter
3 Thread adapter nut
4 Inner sleeve
Install the quick release fastener as follows:
1. Screw the adapter (item 2) into the immersion tube connection bracket.
2. Insert the Allen key or a similar tool through the bores (item 1) to secure the adapter.
3. Slide the thread adapter nut (item 3) over the adapter until the thread adapter nut engages
with a click.
4. Guide the inner sleeve (item 4) through the thread adapter nut into the adapter as far as it
will go.
5. Guide the hose for "filter to pump" through the immersion tube first of all and then through
the quick release fastener.
6. Connect the sample hose (polytetrafluoro-ethylene, 4 mm, blue) to the filter.
7. Screw the filter into the quick release fastener as far as it will go. In doing so, turn the thread
adapter nut, not the filter.
1 2 3
2.
1.
4