Endress+Hauser Liquiline System CAT860, Руководство по эксплуатации

Страница: 22 / 44

Electrical connection Liquiline System CAT860
22
Hauser
6.1 Cable and hose entries
1. Release a suitable cable or hose gland on the underside of the housing and remove the
dummy plug from the entry.
2. Making sure the gland is facing in the right direction, thread the gland onto the cable or hose
end and pull the cable or the hose through the entry and into the housing.

Make sure that the hose projects approx. 2 cm over the entry inside the housing.
3. Connect the cables as per the wiring diagram.
4. Lastly, tighten the cable gland or hose gland from the outside.
a0023309
1 Hose, "pump to analyzer" 4 External compressed air line
2 Hose, "filter to pump" 5 Temperature sensor (optional)
3 Power cable