Endress+Hauser Liquiline System CAT860, Руководство по эксплуатации

Страница: 15 / 44

Liquiline System CAT860 Installation
Hauser
15
5.3.1 Mounting as fixed installation with immersion tube
The cross clamp is mounted in such a way that one closed side faces the center of the basin
while the other closed side faces upwards.
Mount the immersion tube as follows:
1. Adjust the clamps on the cross clamp.
2. Slide the cross clamp over the immersion tube. Make sure that the closed side of the cross
clamp is at the top.
3. Mount the multifunctional clamp ring (funnel-shaped side facing upwards) on the
immersion tube above the cross clamp. The multifunctional clamp ring acts as an anti-slip
lock.
4. Attach the cross clamp, along with the immersion tube, to the transverse pipe. Make sure
that the closed side of the cross clamp faces the basin.
5. Align the assembly and the holder.
6. Tighten the clamp screws finger-tight (finger-tight corresponds to 13 Nm (9.6 lbf ft)).
a0011292
Fig. 8: Mounting the cross clamp
1
2
3
4 Immersion tube
Cross clamp, closed side facing center of basin
Cross clamp, closed side facing upwards
Holder transverse pipe
1
2
3
4