USER MANUAL
ENCOM PULSE Link
© 2012-2015 Encom Wireless Data Solutions Inc.
For ENCOM PULSE Link Version 2.2.6
Page 94
The following table describes the settings associated with the P-MP Remote mode.
Field Name
Description
Remote IP address
Enter the IP address of the P-MP Master radio to which the P-MP Remote
reports. The P-MP Remote radio will automatically send data received
from its associated PULSE radio network to the P-MP Master.
The is an Internet Protocol version 4 (IPv4) address, specified in dotted
notation, as shown in the following example:
Remote port
Enter the UDP port to which data received from the P-MP Remote radio's
associated PULSE radio network will be sent.
Set this value to the
Listening port
setting of the P-MP Master radio.
The default listening port is 20011.
Multicast IP address
Enter the multicast address that the P-MP Remote radio listens to. This is
an Internet Protocol version 4 (IPv4) address, specified in dotted notation,
as shown in the following example:
Set this value to the
Multicast IP address
setting of the P-MP Master
radio.
Valid multicast addresses are in the range of 224.0.0.0 to
239.255.255.255.
The default address is 224.1.1.3.
Multicast port
Enter the UDP port on which the P-MP Remote listens for multicast
packets.
Set this value to the
Multicast port
setting of the P-MP Master radio.
The default multicast port is 20001.
Содержание iPULSE R
Страница 2: ......
