USER MANUAL
ENCOM PULSE Link
© 2012-2015 Encom Wireless Data Solutions Inc.
For ENCOM PULSE Link Version 2.2.6
Page 92
The following table describes the settings associated with the P-MP Master mode.
Field Name
Description
Multicast IP address
Enter a multicast address to which UDP packets will be sent. This is an
Internet Protocol version 4 (IPv4) address, specified in dotted notation, as
shown in the following example:
Set the
Multicast IP address
setting of the P-MP remote radios to this
value.
Valid multicast addresses are in the range of 224.0.0.0 to
239.255.255.255.
The default address is 224.1.1.3.
Multicast port
Enter the port to which the multicast UDP packets will be sent.
Set the
Multicast port
setting of the P-MP remote radios to this value.
The default multicast port is 20001.
Listening port
Enter the port on which to listen for UDP packets coming from the remote
radios.
Set the
Remote port
setting of the P-MP remote radios to this value.
The default listening port is 20011.
Содержание iPULSE R
Страница 2: ......
