Encom iPULSE R, Руководство пользователя

Страница: 76 / 155

USER MANUAL
ENCOM PULSE Link
© 2012-2015 Encom Wireless Data Solutions Inc. For ENCOM PULSE Link Version 2.2.6
Page 76
the radio, wait a minute, and plug them back in. The radio
should be detected, and its configuration automatically
loaded.
For iPULSE radios, unplug the Ethernet and power cables
from the radio, wait a minute, plug them back in, click the
Search for iPULSE devices button, select the radio in the
iPulse Radios form , and click the Load button to load the
radio's configuration.
Contact your ENCOM customer service representative if the
problem persists.
Could not update radio settings,
please try again An error occurred trying to update the radio settings.
For PULSE radios, unplug the USB and power cables from
the radio, wait a minute, plug them back in, wait for the
radio's configuration to be loaded, and then try again.
For iPULSE radios, unplug the Ethernet and power cables
from the radio, wait a minute, plug them back in, click the
Search for iPULSE devices button, select the radio in the
iPulse Radios form , click the Load button to load the radio's
configuration, and then try again.
Contact your ENCOM customer service representative if the
problem persists.
Demo mode The application is currently running in demo mode.
Getting radio settings, please wait Displayed while the application is getting the settings from
the radio. Do not disconnect the radio while the application
is in this state.
Incompatible radio found ENCOM PULSE Link was able to communicate with the
radio, but determined that it is not able to support it.
You may need to upgrade to the latest version of ENCOM
PULSE Link, or use a different application that was designed
to support the radio.
iPULSE radio on-line (192.168.0.1) The application is connected to an iPULSE radio that has
the specified IP address.
Multiple radios found, please unplug
all but one ENCOM PULSE Link can only manage one USB-based
PULSE radio at a time. Unplug all other PULSE radios in
order to proceed.
Radio detected, attempting to
communicate ENCOM PULSE Link has detected a radio on the USB port,
and is currently trying to communicate with it.