33
32
10
Injecting...
11
Lift off skin
z
Hold
your Device
against your skin
and wait while
your medication is
injected.
z
Watch
the Display on
your Device.
z
Do not
move, tilt or
remove your Device
from your skin until
instructed by the Display.
Note:
If you remove your Device before
instructed,
do not
place it back on the injection
site or inject another dose. Contact your
healthcare professional for advice.
z
Lift & hold
your
Device away from
your skin. Your Device
will display that your
injection is complete.
z
Wait.
Your Cartridge
will be partially
ejected from the
bottom of your
Device. This may take
up to 10 seconds.
Do not
cover the bottom of your Device during
this time.
Do not
insert your fingers inside your Device as
the needle will be exposed during this time.
z
If you notice a spot of blood at the injection site,
press a cotton ball or gauze over the injection
site until the bleeding stops.
Do not
rub.
9
Press & hold button
z
Press & hold
the
Injection button to
begin your injection
when instructed by
the Display.
Note:
You can release
the Injection button
after your injection
has started.
Giving Your Enbrel Injection
Giving Your Enbrel Injection
8
Place on skin
z
Place
your Device
with the
blue arrow
pointing at 90
degrees towards your
injection site.
z
Make sure
you can
see the Display on
your Device.
z
Do not
pinch the skin
around your injection site.
Caution:
If you drop your Device with a Cartridge
inserted, eject and dispose of your Cartridge.
Refer to “Troubleshooting” on page 62.
