25
24
9 Injecting...
10 Lift off skin
11 Remove Training Cartridge
z
Lift & hold
your
Device away from
your skin. Your Device
will display that your
injection is complete.
z
Wait.
Your Training
Cartridge will be
partially ejected from
the bottom of your
Device. This may take
up to 10 seconds.
Do not
cover the bottom of your Device during
this time.
Do not
insert your fingers inside your Device.
z
Hold
your Device
against your skin and
wait.
z
Watch
the Display on
your Device.
z
Do not
move, tilt or
remove your Device
from your skin until
instructed by the
Display.
Note:
If you remove your Device before instructed,
do not
place it back on the injection site.
8 Press & hold button
7 Place on skin
z
Press and hold
the
Injection button to
begin your simulated
injection when
instructed by the
Display.
Note:
You can release
the Injection button
after your simulated
injection has started.
z
Pull
your Training
Cartridge straight out
after your Device has
partially ejected it.
z
Check
your Training
Cartridge. There
will be an orange
bar visible in the
inspection window.
z
Place
your Device
with the
blue arrow
pointing at 90
degrees towards your
injection site.
z
Make sure
you can
see the Display on
your Device.
z
Do not
pinch the skin
around your injection
site.
Caution:
If you drop your Device, refer to
“Troubleshooting” on page 62.
Using Your Training Cartridge
Using Your Training Cartridge
z
Carefully replace
the
cap onto the Training
Cartridge to reset it.
z
Do not
dispose of the
Training Cartridge
after your simulated
injection. You may
need it again to
practice injections.
12 Replace cap
